Spain - Español
FR/ Français
ES/ Español
MO/ Français
Inicio   |   Contacto   |   Teléfono soporte técnico 902 152 608

Productos › Advanced Managed Switches › Layer 3 Switches

24 x 10/100M RJ-45 ports
2 x 100/1000M Ethernet Expansion Slots
1 Console port
Network manageable L3

Hi-performance, Network Manageable Fast Ethernet Switch
OvisLink is proud to present the new OV-3226S as the next-generation Fast
Ethernet L3 switch. It has an advanced architecture, 24 Gbps switch fabric,
and 6.6 Mpps L3 forwarding rate. Its hardware wire-speed L3 switching capability
provides a powerful, multi-layered solution not only for enterprises,
but also for Internet Service Providers (ISP’s) and telecom carriers.

OvisLink OV-3226S is an enterprise-class switch providing Fast Ethernet and Gigabit
Ethernet configurations. The OvisLink OV-3226S is an ideal access layer switch for small
enterprise LAN access or branch-office environments, enabling the deployment of new
applications such as IP telephony, video surveillance, building management systems, etc.
Customers can deploy network intelligent services such as quality of service (QoS), rate
limiting, access control lists (ACL s), NAC , multicast, and high-performance IP routing
while keeping the simplicity of traditional LAN switching.

The OvisLink OV-3226S provides:
• Intelligent features at the network edge, such as sophisticated access control lists
(ACL s) and enhanced security.
• Combo Gigabit Ethernet ports flexibility, allowing use of either a copper or a fiber
uplink. The combo port has one 10/100/1000 Ethernet port and one Small Form-
Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time
(using expansion modules)
• Network control and bandwidth optimization using QoS, granular rate limiting, ACLs
(L2-L4), and IGMP Snooping.
• Network security through a wide range of authentication methods, and Network
Access Control based on users, ports, and MAC addresses.
• Extended manageability using CLI.
• Manageable through cluster technology allowing management using only one IP
• Dynamic unicast IP routing, including the most popular and standard protocols such
as RIPv1/2, OSPF, BGP and a Cisco EIGRP compatible (BEIGRP)
• In addition to dynamic IP unicast routing, the OV-3226S is perfectly equipped for
networks requiring multicast support providing Protocol Independent Multicast (PIM)
and Internet Group Management Protocol (IGMP)
• IP services such as DHCP, Proxy ARP and NAT
• Reliability using Virtual Router Redundancy Protocol (VRRP)
• Automatic recognition for straight-through or cross-over cables.
• Lifetime warranty.
• Free software updates.

• Port-based VLAN
• 802.1Q tagged VLAN
• GVRP (GARP VLAN Registration Protocol) to help management and deploy of VLANs
• Port isolation per VLAN
• Super VLAN
• Up to 256 active VLAN

- Spanning tree
• 802.1D Spanning tree
• 802.1w Rapid Spanning tree

- Scalability
• LACP and static Port trunking. Up to 6 groups with up to 8 ports per group
• LLDP (Link Layer Discovery Protocol)
• Clustering. Manageability through a single IP address. Up to 256 switches per cluster
• 2 power sources (optional)

- Control
• Traffic control using back pressure at halfduplex
and 802.3x at full-duplex
• Port rate limit. 64K step size for 100M ports.
8M step size for 1000M ports
• Storm control. Stop sending at threshold to
prevent unicast/multicast/broadcast storms
• IGMP Snooping for multicast traffic control

- QoS
• HOL (Head Of Line) blocking prevention
• 802.1p tagging (8 priorities)
• 4 dispatching queues per port
• FCFS (First Come First Serve) policy
• Strict priority scheduling algorithm
• WRR (Weighted Round Robin) algorithm
• DSCP (Differentiated Services Code Point)

- IP Routing
• Static routing
• Express forwarding
• RIP v1/2
• OSPF v2
• BEIGRP (compatible with Cisco’s BEIGRP)
• BGP v4

- Multicast
• IGMP v1/2/3

- IP Services
• DHCP (Server, client, relay)
• Proxy ARP
• Static and dynamic NAT/PAT

- Security
• 802.1x port-based authentication
• Remote authentication through RADIUS
• Port Security
• Port-MAC binding
• Web authentication
• DHCP Snooping
• IP Source Guard
• DoS Prevention

- Management
• SNMP v1/2
• RMON groups 1,2,3,9
• CLI (Telnet, console)
• Web interface
• NTP (Network Time Protocol) to provide an
accurate and consistent timestamp to all
intranet switches.
• Port mirroring based on traffic flow
• Software and configuration upload/download


• Ports:
- 24 x 10/100M RJ-45 MDI/MDI-X Self-adapting Ports
- 2 x 100/1000M Ethernet Expansion Slots
- 1 Console Port
• Switch fabric: 24 Gbps
• L3 forwarding rate: 6,6 Mpps, all wire-speed and filtering
• Forward rate: All wire-speed forwarding and filtering
• Switching mode: Store and forward
• MAC address table size: 8 K
• Queuing buffer: 64 MB
• FLASH: 8 MB (up to 16 MB)
• SDRAM: 64 MB (up to 128 MB)

• Dimensions: (L – W - H) 442 - 316 - 44 mm
• Weight: 5,4 Kg
• Power consumption: 30 W
• Power input: AC 100~240 V, 47 ~ 63 Hz, 1A/230V
• LED indicators: Power, system, link, activity
• Temperature: Operating: 0 ~ 50°C, non-operating: -40 ~ 70°C
• Humidity: 0 ~ 90% (no condensing)
• Acoustic noise: <15dB
• Mean Time Between Failure (MTBF): 178189,1 hours

• Supported standards:
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1p CoS Prioritization
- IEEE 802.1Q VLAN
- IEEE 802.1w
- IEEE 802.1x
- IEEE 802.3ad
- IEEE 802.3AB
- IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and
1000BASE-T ports
- IEEE 802.3 10BASE-T specification
- IEEE 802.3u 100BASE-TX specification
- IEEE 802.3ab 1000BASE-T specification
- IEEE 802.3z 1000BASE-X specification
- 100BASE-FX (SFP)
- 100BASE-LX (SFP)
- 1000BASE-SX (SFP)
- 1000BASE-LX/LH (SFP)
- 1000BASE-ZX (SFP)
- IGMP v1, IGMP v2, IGMP v3
- RMON I and II standards
- SNMPv1, SNMPv2


Ordering information


Network manageable Ethernet switch with
24 10/100M Fast Ethernet ports, 2 expansion
slots, and 1 Console port. Standard AC
power support.


Network manageable Ethernet switch
with 24 10/100M Fast Ethernet ports, 2
expansion slots, and 1 Console port. DC
power support.